undefined
How to install a GEMS GPS Repeater?
Installing a GEMS GPS repeater involves several steps to ensure proper functionality and signal amplification. Here’s a general guide on how to install a GPS repeater system:
Equipment List:
|
Equipment Lists KIT A |
Equipment Lists KIT B |
|
GPS Amplifier: GA30-DV, 1ea; |
GPS Amplifier: GA30-DV, 1ea; |
|
Roof GNSS Antenna: R440/S440, 1ea; |
Roof GNSS Antenna: R440/S440, 1ea; |
|
Cable Assembly: RG8(LMR400), 30M, 1ea; |
Cable Assembly: RG8(LMR400),30M, 1ea; |
|
Cable Assembly: XHY240(LMR240), 20M, 1ea; |
Cable Assembly: XHY240(LMR240), 20M, 1ea; |
|
Re-radiate Antenna: GRA10, 1ea; |
Re-radiate Antenna: GRA10, 1ea; |
|
Ligting-protector: N-JK-G, 1ea; |
Ligting-protector: N-JK-G, 1ea; |
|
|
|
|
|
Installation Steps:
1. Outdoor Antenna Installation:
- Location: Choose a location with a clear view of the sky where GPS signals are strong (typically on the roof or outside wall).
- Mounting: Fix the outdoor antenna securely using the mounting hardware. Ensure it's stable and has a clear line of sight to GPS satellites.
2. Indoor Antenna Installation:
- Location: Place the indoor antenna where you need to amplify the GPS signal (inside a building, vehicle, etc.).
- Mounting: Securely mount the indoor antenna in a central location where GPS signal coverage is needed.
3. Connecting the Cables:
- Coaxial Cable: Connect the coaxial cable from the outdoor antenna to the repeater unit.
- Power Supply: Connect the power supply to the repeater unit as per the manufacturer’s instructions.
4. Testing and Adjustments:
- Power On: Plug in the repeater unit and power it on.
- Signal Check: Use a GPS device (like a smartphone or GPS receiver) to check the signal strength inside the building or area. Walk around to test different locations.
- Adjustments: If needed, reposition the antennas or repeater unit for optimal signal strength.
5. Finalizing Installation:
- Secure Connections: Ensure all connections (coaxial cables, power) are securely fastened to prevent signal loss.
- Seal Outdoor Connections: If the outdoor antenna is exposed to weather, seal cable connections with weatherproofing tape or sealant.
6. Verification:
- GPS Signal: Verify that the GPS signal inside the building or area is strong and consistent across different locations.
Important Considerations:
- Regulations: Check local regulations regarding the installation of GPS repeaters, especially if you’re installing in a vehicle or a commercial setting.
- Manufacturer’s Instructions: Always follow the specific instructions provided by the GPS repeater kit manufacturer for installation and operation.
- Maintenance: Periodically check and maintain the system to ensure it continues to operate effectively.
By following these steps and considering the important factors, you should be able to successfully install a GPS repeater to enhance GPS signal coverage in your desired area.
Предыдущая страница
Связанные Новости
Авторские права: Шэньчжэнь GEMS NAVIGATION Co., Ltd.